Standard :Tested to DIN EN ISO 6789.

Note :Suitable additional batteries can be found under No. 081574 size 3500. Charger for 4 batteries available as options under: 081590 size 4ULTRA.

Scope of supply of the table application :USB-C data cable, plug-in ratchet (reversible) with ejector, 1 commercially available Li-ion battery type 18650 3.6V / 3400 mAh (can be charged directly within the tool via the USB-C port). Supplied in a sturdy plastic case.

Accuracy :Torque: Clockwise ± 2 %, anticlockwise ± 3 %. Rotation angle: ± 1° for the measurement range up to 100°, ± 1% for the measurement range 100° and beyond.

Version :Display: Large sharp contrast illuminated 2.8 inch TFT display with double scale with viewing angle stability. With battery display and memory display. Torque and rotational angle both displayed at the same time.Display: Peak and Track function modes.Modes: Displaying torque, triggering torque, triggering rotational angle, triggering rotational angle with rotational angle monitoring, triggering rotational angle with torque monitoring. Up to 100 screw tightening profiles can be programmed. Recurrent screw tightening profiles can be summarised into a procedure (up to 10 procedures each with up to 10 screw tightening profiles). Screw tightening profiles and procedures can be programmed directly on the wrench.Memory capacity: 1000 measurement values with timestamp (incl. date and time).Data output: Available via USB-C. The data can the exported as a .csv file.Password protection: available as protection against unauthorised access to the menu (master password) and for verifying screw-tightening cases and procedures. In addition, you can set that reworking a screw connection that has been performed incorrectly requires input of a password.Warning signal outputs are haptic (vibration), visual (change of colour at the display, visible through 360° in any direction due to the LED ring with “traffic light function”) and acoustic (buzzer, beep sound). The pre-warning point can be configured individually. Haptic and acoustic warning signals can be disabled if desired.Easy input of reference dimensions: For tools with a different pitch setting simply input the new pitch. No laborious calculations with formulae.Protection class IP40. The display is splash-proof.The 2-component handle of the torque / rotational angle wrench ensures specially good ergonomics and high torque transmission.Resistant to oils, grease, fuel, brake fluid and Skydrol.Languages: German, English, Spanish, Italian, French.Factory settings: The wrench can be reset to the factory settings.Display of the software version with serial number, load cycle counter and calibration date.Calibration reminder: after number of load cycles.Units of measure: Nm, lbfft, lbt·in.

Supplied with :USB-C data cable, plug-in ratchet (reversible) with ejector, 1 commercially available Li-ion battery type 18650 3.6V / 3400 mAh (can be charged directly within the tool via the USB-C port). Supplied in a sturdy plastic case.

Cutting data :Legend for drawing and formula: l1 = Lever length without plug-in head l2 = Adjusted reference dimension on the torque wrench l3 = Lever length including factory calibration reference dimension l4 = Reference dimension of the plug-in head L = Total length of the tool T1 = Torque to be set T2 = Specified torque