Article no :122725
Instock
Article no :123035
Instock
Article no :122725
Instock
Article no :123035
Instock
# | Attribute | Value |
---|---|---|
1. | Type | W |
2. | Standard | Manufacturer’s standard |
3. | Helix angle characteristic | unequal spacing |
4. | Shank tolerance | h6 |
5. | Machining strategy | HPC |
6. | Tool material | Solid carbide |
7. | Cutting width ae for milling operation | Full slot cutting depth 1×D |
8. | Cutting width ae for milling operation | Full slot cutting depth 1×D |
9. | Colour ring | yellow |
10. | Coating | ZOX |
11. | Through-coolant | no |
12. | Spacing of the cutters | unequal spacing |
13. | Type of product | End / face mill |
14. | Recess ⌀ D1 | 5.7 mm |
15. | Feed fz for side milling in short-chipping aluminium | 0.08 mm |
16. | No. of teeth Z | 3 |
17. | Corner chamfer width at 45° | 0.2 mm |
18. | Shank form | HA |
19. | Cutting edge ⌀ Dc | 6 mm |
20. | Feed fz for slot milling in short-chipping aluminium | 0.06 mm |
21. | Overhang length L1 incl. recess | 18 mm |
22. | Shank ⌀ Ds | 6 mm |
23. | Overall length L | 57 mm |
24. | Flute length Lc | 13 mm |
25. | Direction of infeed | horizontaloblique and vertical |
26. | Shank | DIN 6535 HA to h6 |
27. | Tolerance nominal ⌀ | f8 |
28. | Balance quality with shank | G 2.5 with HA |
29. | Correction factor fz | 3 |
30. | Helix angle | 45 Grad |
31. | maximum cutting depth ap max when side milling | 13 mm |
32. | maximum cutting depth ap max when slot milling from solid | 6 mm |
33. | Corner chamfer angle | 45 Grad |
34. | Cutting depth ap min | 0.1 mm |
35. | EAN/GTIN | 4045197271532 |
36. | brand | GARANT |
Application :
For roughing milling with high demands on the component surface.
Version :
Sturdy roughing end mill without knuckle profile. With strong core, special chip breaker recesses and large polished flutes.
Note :
NEW GENERATION AVAILABLE! Recommended successor product is No. 202004.